Fire protection cavity wall box
Quickbox® Maxi HWD 90 2x2
- Article no: 9499-77.04
- E no.: 372632709
- EAN: 7611614276816
- compatible with Feller SNAPFIX®
- for F30-F90 or EI30-EI90 fire-protection walls
- VKF Approval 26831
- VKF Approval 26846
- also for opposing installation
- for plate thickness >10 - 40 mm
- matching plug-in cover for Art. No. 9498-77 New Look one Art. No. 9919.10
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
- Pipes must be sealed with sealing plugs on both sides of the pipes!
Fire protection cavity wall box
HWD 90 cavity wall boxes for EI30-EI90 fire-protection walls ensure certified and fire-protection compliant electrical installation. Intelligent AFS technology reacts immediately to fire and heat and automatically seals the installation opening. This guarantees the fire resistance class of the fire-protection wall and secures escape routes. Use in all fire-protection walls and the fire-resistance duration of up to 90 minutes ensures maximum flexibility, even when the planning is changed. At the same time, it also maintains the wall's sound insulation requirements.
- compatible with Feller SNAPFIX®
- For fire-protection walls F30-F90 or EI30-EI90
- Maintains the wall's sound insulation protection
- Retrofitting also possible
- With fire-protection cover, can be used as a junction box
- Also for directly opposing installation
- May not be used inside encapsulated walls
- does not match with the following types:
- Prestige model by Feller Edizio Due
Processing note
Final assembly of certain flush-mounted devices for unplastered surfaces: Due to the contact edge of the box, a small joint may form between the cover and the wall surface. If the surface is not plastered, it is advisable to countersink the edge of the box holder into the wall to avoid any joints.
