Results filtered according to:
No results were found for the filter!
AGRO flush-mounted box 2x1
AGRO flush-mounted box with glow wire test 850°C
- compatible with Feller SNAPFIX®
- New with strap attachment
- Increased installation volumes
- Simple alignment
- Partition for circuit separation
- For device connection screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Combination: 2x1
Length: 130.5 mm
Width: 70.5 mm
AGRO flush-mounted box 3x1
AGRO flush-mounted box with glow wire test 850°C
- compatible with Feller SNAPFIX®
- New with strap attachment
- Increased installation volumes
- Simple alignment
- Partition for circuit separation
- For device connection screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Combination: 3x1
Length: 190.5 mm
Width: 70.5 mm
AGRO flush-mounted box 4x1
AGRO flush-mounted box with glow wire test 850°C
- compatible with Feller SNAPFIX®
- New with strap attachment
- Increased installation volumes
- Simple alignment
- Partition for circuit separation
- For device connection screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Combination: 4x1
Length: 250.5 mm
Width: 70.5 mm
AGRO flush-mounted box 2x2
AGRO flush-mounted box with glow wire test 850°C
- compatible with Feller SNAPFIX®
- New with strap attachment
- Increased installation volumes
- Simple alignment
- Partition for circuit separation
- For device connection screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Combination: 2x2
Length: 130.5 mm
Width: 130.5 mm
AGRO flush-mounted box 3x2
AGRO flush-mounted box with glow wire test 850°C
- compatible with Feller SNAPFIX®
- New with strap attachment
- Increased installation volumes
- Simple alignment
- Partition for circuit separation
- For device connection screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Combination: 3x2
Length: 190.5 mm
Width: 130.5 mm
AGRO flush-mounted box 3x3
AGRO flush-mounted box with glow wire test 850°C
- compatible with Feller SNAPFIX®
- New with strap attachment
- Increased installation volumes
- Simple alignment
- Partition for circuit separation
- For device connection screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Combination: 3x3
Length: 190.5 mm
Width: 190.5 mm
AGRO flush-mounted box 4x2
AGRO flush-mounted box with glow wire test 850°C
- compatible with Feller SNAPFIX®
- New with strap attachment
- Increased installation volumes
- Simple alignment
- Partition for circuit separation
- For device connection screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Combination: 4x2
Length: 250.5 mm
Width: 130.5 mm
AGRO flush-mounted box 4x3
AGRO flush-mounted box with glow wire test 850°C
- compatible with Feller SNAPFIX®
- New with strap attachment
- Increased installation volumes
- Simple alignment
- Partition for circuit separation
- For device connection screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Combination: 4x3
Length: 250.5 mm
Width: 190.5 mm
Flush-mounting back box 1x1 850°C
Flush-mounting back boxes with glow wire test 850°
- compatible with Feller SNAPFIX®
- Version 1x1 with four devices to protect the heads of the screws from parasitic voltages
- Essential in timber construction
- Electrically well-insulated, shock and pressure-resistant.
- Flat bearing surface thanks to 4 support points
- For device connection screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Combination: 1x1
Length: 77 mm
Width: 77 mm
UP-Kombi in 850°C
Flush-mounting back boxes with glow wire test 850°
- compatible with Feller SNAPFIX®
- Can be combined
- Essential in timber construction
- Electrically well-insulated, shock and pressure-resistant.
- Flat bearing surface thanks to 4 support points
- For device connection screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Combination: 1x1
Length: 72 mm
Width: 72 mm
Einlasskasten 2x1
Flush-mounting back boxes with glow wire test 850°
- compatible with Feller SNAPFIX®
- Essential in timber construction
- Electrically well-insulated, shock and pressure-resistant.
- Flat bearing surface thanks to 4 support points
- For device connection screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Combination: 2x1
Length: 130 mm
Width: 70 mm
Einlasskasten 3x1
Flush-mounting back boxes with glow wire test 850°
- compatible with Feller SNAPFIX®
- Essential in timber construction
- Electrically well-insulated, shock and pressure-resistant.
- Flat bearing surface thanks to 4 support points
- For device connection screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Combination: 3x1
Length: 190 mm
Width: 70 mm