Results filtered according to:
No results were found for the filter!
One place back box "the blue one" 59 mm
In-wall junction box 1x1
- compatible with Feller SNAPFIX®
- Suitable for screw or claw fixing of accessories
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
- With injection-moulded signal cover
- For assembling combinations, centre distance 60 mm
- Low-lying plaster grips
Depth: 59 mm
Diameter: 71 mm
Break-out openings Ø 20 mm: 11
One place back box "the blue one" 70 mm
In-wall junction box 1x1
- compatible with Feller SNAPFIX®
- Suitable for screw or claw fixing of accessories
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
- With injection-moulded signal cover
- For assembling combinations, centre distance 60 mm
- Low-lying plaster grips
Diameter: 71 mm
Depth: 70 mm
Break-out openings Ø 20 mm: 11
Inlet casing 1x1
Flush mounted back boxes for equipment
- compatible with Feller SNAPFIX®
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Length: 77 mm
Width: 77 mm
Depth: 70 mm
Inlet casing 1x1
Flush mounted back boxes for equipment
- compatible with Feller SNAPFIX®
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Length: 77 mm
Width: 77 mm
Depth: 70 mm
Extension piece AGRO 12mm for inlet box 9902.21.xx
Flush mounted back boxes for equipment
- compatible with Feller SNAPFIX®
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Length: 77 mm
Width: 77 mm
Depth: 12 mm
Extension piece AGRO 45mm for inlet box 9902.21.xx
Flush mounted back boxes for equipment
- compatible with Feller SNAPFIX®
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Length: 77 mm
Width: 77 mm
Depth: 45 mm
Inlet casing 1x1
Flush mounted back boxes for equipment
- compatible with Feller SNAPFIX®
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Length: 78 mm
Width: 78 mm
Depth: 58 mm
Inlet casing 2x1
AGRO Flush-mounted box for equipment
- compatible with Feller SNAPFIX®
- Nail domes also serve as Prefix® connection points
- Increased stability
- Separately guided nailing points
- With separator wall and stabilisation lid
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Length: 137 mm
Width: 77 mm
Depth: 70 mm
Inlet casing 3x1
AGRO Flush-mounted box for equipment
- compatible with Feller SNAPFIX®
- Nail domes also serve as Prefix® connection points
- Increased stability
- Separately guided nailing points
- With separator wall and stabilisation lid
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Length: 197 mm
Width: 77 mm
Depth: 70 mm
Inlet casing 4x1
AGRO Flush-mounted box for equipment
- compatible with Feller SNAPFIX®
- Nail domes also serve as Prefix® connection points
- Increased stability
- Separately guided nailing points
- With separator wall and stabilisation lid
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Length: 257 mm
Width: 77 mm
Depth: 70 mm
Inlet casing 2x2
AGRO Flush-mounted box for equipment
- compatible with Feller SNAPFIX®
- Nail domes also serve as Prefix® connection points
- Increased stability
- Separately guided nailing points
- With separator wall and stabilisation lid
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Length: 137 mm
Width: 137 mm
Depth: 70 mm
Inlet casing 3x2
AGRO Flush-mounted box for equipment
- compatible with Feller SNAPFIX®
- Nail domes also serve as Prefix® connection points
- Increased stability
- Separately guided nailing points
- With separator wall and stabilisation lid
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Length: 197 mm
Width: 137 mm
Depth: 70 mm