Results filtered according to:
No results were found for the filter!
Knock-in dowel for system equipment carrier
System equipment carrier
- Building materials: Concrete, Hollow block made from lightweight concrete, Vertically perforated brick, Perforated sand-lime brick, Solid sand-lime brick, Natural stone with dense structure, Solid block made from lightweight concrete, Solid brick
Drill Ø: 8 mm
Length: 110 mm
for insulation thicknesses: 100-130 mm
Knock-in dowel for system equipment carrier
System equipment carrier
- Building materials: Concrete, Hollow block made from lightweight concrete, Vertically perforated brick, Perforated sand-lime brick, Solid sand-lime brick, Natural stone with dense structure, Solid block made from lightweight concrete, Solid brick
min. hole depth: 60 mm
Drill Ø: 8 mm
Length: 150 mm
Knock-in dowel for system equipment carrier
System equipment carrier
- Building materials: Concrete, Hollow block made from lightweight concrete, Vertically perforated brick, Perforated sand-lime brick, Solid sand-lime brick, Natural stone with dense structure, Solid block made from lightweight concrete, Solid brick
min. hole depth: 60 mm
Drill Ø: 8 mm
Length: 190 mm
Knock-in dowel for system equipment carrier
System equipment carrier
- Building materials: Concrete, Hollow block made from lightweight concrete, Vertically perforated brick, Perforated sand-lime brick, Solid sand-lime brick, Natural stone with dense structure, Solid block made from lightweight concrete, Solid brick
min. hole depth: 60 mm
Drill Ø: 8 mm
Length: 230 mm
Knock-in dowel for system equipment carrier
System equipment carrier
- Building materials: Concrete, Hollow block made from lightweight concrete, Vertically perforated brick, Perforated sand-lime brick, Solid sand-lime brick, Natural stone with dense structure, Solid block made from lightweight concrete, Solid brick
min. hole depth: 60 mm
Drill Ø: 8 mm
for insulation thicknesses: 280-310 mm
System equipment carrier 160 - 240 mm with universal mounting plate
System equipment carrier
- Adaptation to insulation thickness possible in 10 mm steps
- Including 2 screw dowels
- Material: Polyethylene
- Insulation material: Neopor
- Processing temperature: - 5 °C / + 60 °C
Length: 220 mm
Width: 110 mm
Height: 160-240 mm
System equipment carrier 240 - 310 mm with universal mounting plate
System equipment carrier
- Adaptation to insulation thickness possible in 10 mm steps
- Including 2 screw dowels
- Material: Polyethylene
- Insulation material: Neopor
- Processing temperature: - 5 °C / + 60 °C
Length: 220 mm
Width: 110 mm
Height: 240-310 mm
Flush-mounting back boxes
Telescope switch box
- compatible with Feller SNAPFIX®
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Combination: 1x1
Length: 100 mm
Width: 100 mm
Telescopic flush mounted back box
Telescopic flush mounted box 1x1 for insulation thicknesses 80 - 200 mm
- compatible with Feller SNAPFIX®
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Length: 105 mm
Width: 105 mm
Insulation thickness: 80-200 mm
Flush mounted back box for combinations with 1159-81
Telescopic flush mounted box 1x1 for insulation thicknesses 80 - 200 mm
- compatible with Feller SNAPFIX®
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
Length: 50 mm
Width: 60 mm
Depth: 50 mm
Telescope equipment carrier
Telescopic equipment carrier 120 x 120 mm for cohibentation thicknesses 80 - 200 mm
Article no: 1159-80
Length: 120 mm
Width: 120 mm
Insulation thickness: 80-200 mm