Installation housing ThermoX® Iso +

Article no: 1159-70
E no.: 372911309
EAN: 4013456547902

with external insulation of ceilings
for insulation thicknesses of 100 mm and above
Adjustment to the insulation thickness in 10 mm steps.
for LED luminaires up to 8 Watt
max. luminaire installation depth 70 mm to 130 mm (insulation thickness less 30 mm)
Front panel with ceiling exit (CE) Ø 68 mm or universal up to Ø 86 mm
Space for ballast devices 120 mm x 30 mm x 28 mm (installation diameter 68 mm, installation depth 70 mm)

Length

220 mm

Width

110 mm

Height

160 mm

Insulation thickness

100 - 160 mm

Ceiling exit (CE) Ø

68 - 86 mm

max. lamp output

8 Watt

max. installation depth for the LED luminaires

70 - 130 mm

Cable or conduit entries up to max. ø 25 mm

Halogen-free

Yes

Dispatch

Add to the project list

Download product data sheet (PDF)

Show additional downloads

Installation housing ThermoX® Iso +

Installation housing for the secure and heat-bridge-free installation of rigid and swivelling built-in LED luminaires or other installation accessories in insulated ceilings. The housing protects the surrounding insulation material against the high operating temperatures of the LED luminaire and protects the LED luminaire itself against dirt. The integrated insulation element reliably prevents heat bridges.

For the installation of luminaires and installation accessories in insulated ceilings
Suitable for all standard insulation materials
Thermically-protected installation space
The integrated insulation element prevents heat bridges
For insulation thicknesses from 100 mm to 160 mm (170 mm to 350 mm with extension element)
Adjustment to the insulation thickness in 10 mm steps.
Installation diameter up to ø 86 mm

Examples of use

Buildings are constructed heat-bridge-free using the ETICS composite thermal insulation systems, e.g. …

…insulated external ceilings of built-over terraces with lighting.

…insulated, recessed entrance areas with lighting.

…insulated facades with outdoor lighting over the entrance and garage door.

Heat-bridge calculation / temperature profile

A heat bridge calculation by the Passivhaus Institut, Darmstadt, shows that heat bridges can be reliably prevented by the installation housing for the external insulation. The installation housing is also suitable for use in passive houses.

Installation

Adapt installation housing to the measured insulation thickness.

Mark fixing point 55 mm from the luminaire centre point.

Alternative: Position the installation housing with the alignment markings for the luminaire and mark the drill hole.

Break out the conduit entry or cut an exact cable entry for air-tight installation, e.g. by using the KAISER universal opening cutter (Art. No. 1085-80).