Results filtered according to:
No results were found for the filter!
Extension element for universal equipment carrier
- to extend the Universal equipment carrier by 100 mm simply by latching on
- can be reduced in 10 mm steps by cutting
- with rock wool pre-cut parts to fill the extension panel
Length: 220 mm
Width: 100 mm
Depth: 100 mm
System equipment carrier 160 - 240 mm with universal mounting plate
System equipment carrier
- Adaptation to insulation thickness possible in 10 mm steps
- Including 2 screw dowels
- Material: Polyethylene
- Insulation material: Neopor
- Processing temperature: - 5 °C / + 60 °C
System equipment carrier 240 - 310 mm with universal mounting plate
System equipment carrier
- Adaptation to insulation thickness possible in 10 mm steps
- Including 2 screw dowels
- Material: Polyethylene
- Insulation material: Neopor
- Processing temperature: - 5 °C / + 60 °C
Installation housing ThermoX® Iso +
- with external insulation of ceilings
- for insulation thicknesses of 100 mm and above
- Adjustment to the insulation thickness in 10 mm steps.
- for LED luminaires up to 8 Watt
- max. luminaire installation depth 70 mm to 130 mm (insulation thickness less 30 mm)
- Front panel with ceiling exit (CE) Ø 68 mm or universal up to Ø 86 mm
- Space for ballast devices 120 mm x 30 mm x 28 mm (installation diameter 68 mm, installation depth 70 mm)
Length: 220 mm
Width: 110 mm
Height: 160 mm
Extension element for ThermoX® Iso +
- for installation housing for external insulation
- for insulation thicknesses 170 - 350 mm
- Adjustment to the insulation thickness in 10 mm steps.
Length: 220 mm
Width: 110 mm
Height: 190 mm
Mini equipment carrier with 4 swivels and 2 ribs
- Retrofitting in existing composite thermal insulation systems (ETICS)
- consisting of anchor sleeve and attachment core
- for insulation thicknesses of 80 mm and upwards
- Screw-on surface with 10 mm tolerance compensation
- 4 swivel cutters
- 2 ribs
- Sealing lip on all sides
- Weight loading up to 30 N (3 kg)
- equipment attached with self-tapping screws with Ø of 3.2 - 4 mm
Length: 60 mm
Installation opening: Ø 20 mm
Halogen-free: Yes
One place back box "the blue one" 59 mm
In-wall junction box 1x1
- compatible with Feller SNAPFIX®
- Suitable for screw or claw fixing of accessories
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
- With injection-moulded signal cover
- For assembling combinations, centre distance 60 mm
- Low-lying plaster grips
O-range® one-gang box, Depth 49 mm, halogen-free
- with holding ring
For panel thickness: 7 - 40 mm
Depth: 49 mm
Cut hole Ø: 68 mm
O-range® one-gang junction box, Depth 62 mm, halogen-free
- with holding ring
For panel thickness: 7 - 40 mm
Depth: 62 mm
Cut hole Ø: 68 mm
Two-gang junction box, Depth 47 mm, halogen-free
- for 2 electrical inserts or 1 block insert
- with holding ring
For panel thickness: 7 - 40 mm
Depth: 47 mm
Cut hole Ø: 2 x 68 mm
Wall light connection box with cover, air tight, Depth 45 mm, halogen-free
- with inner fitting cover
- not to be used as a junction box!
- with holding ring
For panel thickness: 7 - 40 mm
Depth: 45 mm
Cut hole Ø: 35 mm
Light hook, 55 mm
- Proof voltage: 2500 V tested
- For retrofitting in ceiling boxes (EN 60670)
- with M5 thread, fully insulated
Length of shank: 55 mm
Diameter hook: 26 mm
Overall length: 81 mm