HaloX® 100 installation kit

HaloX® 100 installation kit

HaloX® 100 installation kit
HaloX® 100 installation kit
  • 1281-20
  • 920896909
  • 4013456546783
  • for retrofitting of HaloX®-O housings into slab ceilings
  • required hole size Ø 150-160 mm
System
HaloX® 100
Height
30 mm
For Art. No.
1281-xx
Dispatch
10
Product information

HaloX® 100 installation kit

HaloX® 100 installation kit can be retrofitted in existing slab ceilings (50 mm thickness and greater) with or without transformer tunnel.

  • For retrofitting in slab ceilings
  • Minimal effect on statics
  • Large selection of opening sizes up to Ø 100 mm
  • Extension rings for bridging the slab ceiling element and for increasing the luminaire installation depth

Note

HaloX® installation kit mounting

Cut drilling hole (Ø 150–160 mm) in the slab ceiling.

Combine the extension ring and front part to correspond to the ceiling thickness and installation depth.

Attach the housing and place in the drilling hole, mark and fasten. Install the conduit in the KSK entry.

If necessary, secure the fixed housing with wire to the reinforcement.

Order front part separately

Download
Product data sheet

HaloX® 100 installation kit

Article no: 1281-20

Download
Leaflets

System overview of HaloX®

990.2 KB | 2021-07-19