- dimensions in accordance with German DIN 49073
- For M20/M25 conduits and cables
- dimensions in accordance with German DIN 49073
- For M20/M25 conduits and cables
- for CEE 16 A connectors
- only for screw fixing
- with sealing ring, protection class IP3X
- dimensions in accordance with German DIN 49073
- For M20/M25 conduits and cables
- for use with externally-insulated walls
- for secure fixing of lights, intercoms, motion detectors etc.
- can be extended in steps of 100 mm each (max. 360 mm) using extension elements Art. No. 1159-27
- can be reduced in 10 mm steps
- With pre-cut rock wool parts through which the equipment carrier can be fed
- to extend the Universal equipment carrier by 100 mm simply by latching on
- can be reduced in 10 mm steps by cutting
- with rock wool pre-cut parts to fill the extension panel
- Adaptation to insulation thickness possible in 10 mm steps
- Including 2 screw dowels
- Material: Polyethylene
- Insulation material: Neopor
- Processing temperature: - 5 °C / + 60 °C
- Adaptation to insulation thickness possible in 10 mm steps
- Including 2 screw dowels
- Material: Polyethylene
- Insulation material: Neopor
- Processing temperature: - 5 °C / + 60 °C
- with external insulation of ceilings
- for insulation thicknesses of 100 mm and above
- Adjustment to the insulation thickness in 10 mm steps.
- for LED luminaires up to 8 Watt
- max. luminaire installation depth 70 mm to 130 mm (insulation thickness less 30 mm)
- Front panel with ceiling exit (CE) Ø 68 mm or universal up to Ø 86 mm
- Space for ballast devices 120 mm x 30 mm x 28 mm (installation diameter 68 mm, installation depth 70 mm)
- for installation housing for external insulation
- for insulation thicknesses 170 - 350 mm
- Adjustment to the insulation thickness in 10 mm steps.
- Retrofitting in existing composite thermal insulation systems (ETICS)
- consisting of anchor sleeve and attachment core
- for insulation thicknesses of 80 mm and upwards
- Screw-on surface with 10 mm tolerance compensation
- 4 swivel cutters
- 2 ribs
- Sealing lip on all sides
- Weight loading up to 30 N (3 kg)
- equipment attached with self-tapping screws with Ø of 3.2 - 4 mm
- compatible with Feller SNAPFIX®
- Suitable for screw or claw fixing of accessories
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
- With injection-moulded signal cover
- For assembling combinations, centre distance 60 mm
- Low-lying plaster grips
- compatible with Feller SNAPFIX®
- Suitable for screw or claw fixing of accessories
- For device screws Ø 3 mm
- Max. tightening torque 0.5 Nm
- With injection-moulded signal cover
- For assembling combinations, centre distance 60 mm
- Low-lying plaster grips