Fire protection cavity wall box

Quickbox® HWD 90 3x1

Quickbox® HWD 90 3x1
Preview: Quickbox® HWD 90 3x1
Quickbox® HWD 90 3x1
  • 9498-77.03
  • 155014029
  • 7611614240671
  • compatible with Feller SNAPFIX®
  • for F30-F90 or EI30-EI90 fire-protection walls
  • VKF approval 21042
  • also for opposing installation
  • for plate thickness >10 - 40 mm
  • matching plug-in cover for Art. No. 9498-77 New Look one Art. No. 9919.10
  • For device screws Ø 3 mm
  • Max. tightening torque 0.5 Nm
Length
205 mm
Width
83 mm
Depth
50 mm
Cut hole Ø
83 mm
Combination
3x1
Dispatch
5
Product information

Fire protection cavity wall box

HWD 90 cavity wall boxes for EI30-EI90 fire-protection walls ensure certified and fire-protection compliant electrical installation. Intelligent AFS technology reacts immediately to fire and heat and automatically seals the installation opening. This guarantees the fire resistance class of the fire-protection wall and secures escape routes. Use in all fire-protection walls and the fire-resistance duration of up to 90 minutes ensures maximum flexibility, even when the planning is changed. At the same time, it also maintains the wall's sound insulation requirements.

  • compatible with Feller SNAPFIX®
  • For fire-protection walls F30-F90 or EI30-EI90
  • Maintains the wall's sound insulation protection
  • Retrofitting also possible
  • With fire-protection cover, can be used as a junction box
  • Also for directly opposing installation
  • May not be used inside encapsulated walls
  • does not match with the following types:
  • Prestige model by Feller Edizio Due

Processing note

Final assembly of certain flush-mounted devices for unplastered surfaces: Due to the contact edge of the box, a small joint may form between the cover and the wall surface. If the surface is not plastered, it is advisable to countersink the edge of the box holder into the wall to avoid any joints.

Montage Quickbox HWD 90 in Brandschutzwänden EI30 - EI90

Achtung: Kabelinstallation in den Rohren zwingend!

Installationsöffnung Ø 83 mm mit einem Fräser (z. B. Bi-Metall-Fräser 1082-84) erstellen.

Passgenaue Einführungen für Kabel erstellen.

Nur das Kabel in die Dose einführen!

Dose in die Einbauöffnung einführen und ausrichten.

Dose mit den zwei vormontierten FX4-Schrauben befestigen.

Apparat wie gewohnt einbauen.

Certificates
Certificate

VKF approval Quickbox HWD 90

Select download
Download
Product data sheet

Quickbox® HWD 90 3x1

Article no: 9498-77.03

Download
Brochure

Fire protection.

Box, housing and sealing systems for fire-protection walls and ceilings.

Instruction

Assembly instructions fire protection and sound insulation boxes.

Instructions available in German and French.

Select download
Instruction

Fire-stop box Quickbox HWD90.

Fire-stop box Quickbox HWD 90 for electrical installations in fire-protection walls EI 30 - EI 90.

For installations with cables.

866.5 KB | 2020-01-24

Similar products